Merge tag 'drm-msm-next-2025-05-16' of https://gitlab.freedesktop.org/drm/msm into drm-next

Updates for v6.16

CI:
- uprev mesa

GPU:
- ACD (Adaptive Clock Distribution) support for X1-85.  This is required
  enable the higher frequencies.
- Drop fictional `address_space_size`.  For some older devices, the address
  space size is limited to 4GB to avoid potential 64b rollover math problems
  in the fw.  For these, an `ADRENO_QUIRK_4GB_VA` quirk is added.  For
  everyone else we get the address space size from the SMMU `ias` (input
  address sizes), which is usually 48b.
- Improve robustness when GMU HFI responses time out
- Fix crash when throttling GPU immediately during boot
- Fix for rgb565_predicator on Adreno 7c3
- Remove `MODULE_FIRMWARE()`s for GPU, the GPU can load the firmware after
  probe and having partial set of fw (ie. sqe+gmu but not zap) causes problems

MDSS:
- Added SAR2130P support to MDSS driver

DPU:
- Changed to use single CTL path for flushing on DPU 5.x+
- Improved SSPP allocation code to allow sharing of SSPP between planes
- Enabled SmartDMA on SM8150, SC8180X, SC8280XP, SM8550
- Added SAR2130P support
- Disabled DSC support on MSM8937, MSM8917, MSM8953, SDM660
- Misc fixes

DP:
- Switch to use new helpers for DP Audio / HDMI codec handling
- Fixed LTTPR handling

DSI:
- Added support for SA8775P
- Added SAR2130P support

MDP4:
- Fixed LCDC / LVDS controller on

HDMI:
- Switched to use new helpers for ACR data
- Fixed old standing issue of HPD not working in some cases

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://lore.kernel.org/r/CAF6AEGv2Go+nseaEwRgeZbecet-h+Pf2oBKw1CobCF01xu2XVg@mail.gmail.com

Author: airlied

Documentation/devicetree/bindings/display/msm/dp-controller.yaml

@@ -31,6 +31,7 @@ properties:
           - qcom,sm8650-dp
       - items:
           - enum:
+              - qcom,sar2130p-dp
               - qcom,sm6350-dp
               - qcom,sm8150-dp
               - qcom,sm8250-dp

Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml

@@ -23,6 +23,8 @@ properties:
               - qcom,msm8996-dsi-ctrl
               - qcom,msm8998-dsi-ctrl
               - qcom,qcm2290-dsi-ctrl
+              - qcom,sa8775p-dsi-ctrl
+              - qcom,sar2130p-dsi-ctrl
               - qcom,sc7180-dsi-ctrl
               - qcom,sc7280-dsi-ctrl
               - qcom,sdm660-dsi-ctrl
@@ -314,6 +316,8 @@ allOf:
           contains:
             enum:
               - qcom,msm8998-dsi-ctrl
+              - qcom,sa8775p-dsi-ctrl
+              - qcom,sar2130p-dsi-ctrl
               - qcom,sc7180-dsi-ctrl
               - qcom,sc7280-dsi-ctrl
               - qcom,sdm845-dsi-ctrl

Documentation/devicetree/bindings/display/msm/dsi-phy-7nm.yaml

@@ -17,6 +17,8 @@ properties:
     enum:
       - qcom,dsi-phy-7nm
       - qcom,dsi-phy-7nm-8150
+      - qcom,sa8775p-dsi-phy-5nm
+      - qcom,sar2130p-dsi-phy-5nm
       - qcom,sc7280-dsi-phy-7nm
       - qcom,sm6375-dsi-phy-7nm
       - qcom,sm8350-dsi-phy-5nm

Documentation/devicetree/bindings/display/msm/hdmi.yaml

@@ -66,21 +66,6 @@ properties:
     maxItems: 1
     description: hpd pin
 
-  qcom,hdmi-tx-mux-en-gpios:
-    maxItems: 1
-    deprecated: true
-    description: HDMI mux enable pin
-
-  qcom,hdmi-tx-mux-sel-gpios:
-    maxItems: 1
-    deprecated: true
-    description: HDMI mux select pin
-
-  qcom,hdmi-tx-mux-lpm-gpios:
-    maxItems: 1
-    deprecated: true
-    description: HDMI mux lpm pin
-
   '#sound-dai-cells':
     const: 1
 
@@ -89,12 +74,12 @@ properties:
     $ref: /schemas/graph.yaml#/properties/ports
     properties:
       port@0:
-        $ref: /schemas/graph.yaml#/$defs/port-base
+        $ref: /schemas/graph.yaml#/properties/port
         description: |
           Input endpoints of the controller.
 
       port@1:
-        $ref: /schemas/graph.yaml#/$defs/port-base
+        $ref: /schemas/graph.yaml#/properties/port
         description: |
           Output endpoints of the controller.
 

Documentation/devicetree/bindings/display/msm/mdp4.yaml

@@ -18,16 +18,23 @@ properties:
 
   clocks:
     minItems: 6
-    maxItems: 6
+    maxItems: 8
 
   clock-names:
+    minItems: 6
     items:
       - const: core_clk
       - const: iface_clk
       - const: bus_clk
       - const: lut_clk
       - const: hdmi_clk
       - const: tv_clk
+      - const: lcdc_clk
+      - const: pxo
+        description: XO used to drive the internal LVDS PLL
+
+  '#clock-cells':
+    const: 0
 
   reg:
     maxItems: 1

Documentation/devicetree/bindings/display/msm/qcom,mdss.yaml

@@ -84,6 +84,18 @@ properties:
     items:
       - description: MDSS_CORE reset
 
+  interconnects:
+    minItems: 1
+    items:
+      - description: Interconnect path from mdp0 (or a single mdp) port to the data bus
+      - description: Interconnect path from CPU to the reg bus
+
+  interconnect-names:
+    minItems: 1
+    items:
+      - const: mdp0-mem
+      - const: cpu-cfg
+
 required:
   - compatible
   - reg

Documentation/devicetree/bindings/display/msm/qcom,sa8775p-mdss.yaml

@@ -52,12 +52,23 @@ patternProperties:
         items:
           - const: qcom,sa8775p-dp
 
+  "^dsi@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+    properties:
+      compatible:
+        contains:
+          const: qcom,sa8775p-dsi-ctrl
+
   "^phy@[0-9a-f]+$":
     type: object
     additionalProperties: true
     properties:
       compatible:
-        const: qcom,sa8775p-edp-phy
+        contains:
+          enum:
+            - qcom,sa8775p-dsi-phy-5nm
+            - qcom,sa8775p-edp-phy
 
 required:
   - compatible
@@ -139,6 +150,20 @@ examples:
                         remote-endpoint = <&mdss0_dp0_in>;
                     };
                 };
+
+                port@1 {
+                    reg = <1>;
+                    dpu_intf1_out: endpoint {
+                        remote-endpoint = <&mdss0_dsi0_in>;
+                    };
+                };
+
+                port@2 {
+                    reg = <2>;
+                    dpu_intf2_out: endpoint {
+                        remote-endpoint = <&mdss0_dsi1_in>;
+                    };
+                };
             };
 
             mdss0_mdp_opp_table: opp-table {
@@ -186,6 +211,160 @@ examples:
             vdda-pll-supply = <&vreg_l4a>;
         };
 
+        dsi@ae94000 {
+            compatible = "qcom,sa8775p-dsi-ctrl", "qcom,mdss-dsi-ctrl";
+            reg = <0x0ae94000 0x400>;
+            reg-names = "dsi_ctrl";
+
+            interrupt-parent = <&mdss>;
+            interrupts = <4>;
+
+            clocks = <&dispc_byte_clk>,
+                     <&dispcc_intf_clk>,
+                     <&dispcc_pclk>,
+                     <&dispcc_esc_clk>,
+                     <&dispcc_ahb_clk>,
+                     <&gcc_bus_clk>;
+            clock-names = "byte",
+                          "byte_intf",
+                          "pixel",
+                          "core",
+                          "iface",
+                          "bus";
+            assigned-clocks = <&dispcc_byte_clk>,
+                              <&dispcc_pclk>;
+            assigned-clock-parents = <&mdss0_dsi0_phy 0>, <&mdss0_dsi0_phy 1>;
+            phys = <&mdss0_dsi0_phy>;
+
+            operating-points-v2 = <&dsi0_opp_table>;
+            power-domains = <&rpmhpd SA8775P_MMCX>;
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    mdss0_dsi0_in: endpoint {
+                        remote-endpoint = <&dpu_intf1_out>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    mdss0_dsi0_out: endpoint { };
+                };
+            };
+
+            dsi0_opp_table: opp-table {
+                compatible = "operating-points-v2";
+
+                opp-358000000 {
+                    opp-hz = /bits/ 64 <358000000>;
+                    required-opps = <&rpmhpd_opp_svs_l1>;
+                };
+            };
+        };
+
+        mdss0_dsi0_phy: phy@ae94400 {
+            compatible = "qcom,sa8775p-dsi-phy-5nm";
+            reg = <0x0ae94400 0x200>,
+                  <0x0ae94600 0x280>,
+                  <0x0ae94900 0x27c>;
+            reg-names = "dsi_phy",
+                        "dsi_phy_lane",
+                        "dsi_pll";
+
+            #clock-cells = <1>;
+            #phy-cells = <0>;
+
+            clocks = <&dispcc_iface_clk>,
+                     <&rpmhcc_ref_clk>;
+            clock-names = "iface", "ref";
+
+            vdds-supply = <&vreg_dsi_supply>;
+        };
+
+        dsi@ae96000 {
+            compatible = "qcom,sa8775p-dsi-ctrl", "qcom,mdss-dsi-ctrl";
+            reg = <0x0ae96000 0x400>;
+            reg-names = "dsi_ctrl";
+
+            interrupt-parent = <&mdss>;
+            interrupts = <4>;
+
+            clocks = <&dispc_byte_clk>,
+                     <&dispcc_intf_clk>,
+                     <&dispcc_pclk>,
+                     <&dispcc_esc_clk>,
+                     <&dispcc_ahb_clk>,
+                     <&gcc_bus_clk>;
+            clock-names = "byte",
+                          "byte_intf",
+                          "pixel",
+                          "core",
+                          "iface",
+                          "bus";
+            assigned-clocks = <&dispcc_byte_clk>,
+                              <&dispcc_pclk>;
+            assigned-clock-parents = <&mdss0_dsi1_phy 0>, <&mdss0_dsi1_phy 1>;
+            phys = <&mdss0_dsi1_phy>;
+
+            operating-points-v2 = <&dsi1_opp_table>;
+            power-domains = <&rpmhpd SA8775P_MMCX>;
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    mdss0_dsi1_in: endpoint {
+                        remote-endpoint = <&dpu_intf2_out>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    mdss0_dsi1_out: endpoint { };
+                };
+            };
+
+            dsi1_opp_table: opp-table {
+                compatible = "operating-points-v2";
+
+                opp-358000000 {
+                    opp-hz = /bits/ 64 <358000000>;
+                    required-opps = <&rpmhpd_opp_svs_l1>;
+                };
+            };
+        };
+
+        mdss0_dsi1_phy: phy@ae96400 {
+            compatible = "qcom,sa8775p-dsi-phy-5nm";
+            reg = <0x0ae96400 0x200>,
+                  <0x0ae96600 0x280>,
+                  <0x0ae96900 0x27c>;
+            reg-names = "dsi_phy",
+                        "dsi_phy_lane",
+                        "dsi_pll";
+
+            #clock-cells = <1>;
+            #phy-cells = <0>;
+
+            clocks = <&dispcc_iface_clk>,
+                     <&rpmhcc_ref_clk>;
+            clock-names = "iface", "ref";
+
+            vdds-supply = <&vreg_dsi_supply>;
+        };
+
         displayport-controller@af54000 {
             compatible = "qcom,sa8775p-dp";