diff --git a/boards/nordic/nrf7120pdk/nrf7120pdk_nrf7120-pinctrl.dtsi b/boards/nordic/nrf7120pdk/nrf7120pdk_nrf7120-pinctrl.dtsi
index f9cd55542ec..589d75c817b 100644
--- a/boards/nordic/nrf7120pdk/nrf7120pdk_nrf7120-pinctrl.dtsi
+++ b/boards/nordic/nrf7120pdk/nrf7120pdk_nrf7120-pinctrl.dtsi
@@ -30,12 +30,12 @@
 	/omit-if-no-ref/ uart30_default: uart30_default {
 		group1 {
 			psels = <NRF_PSEL(UART_TX, 0, 5)>,
-				<NRF_PSEL(UART_RTS, 0, 2)>;
+				<NRF_PSEL(UART_RTS, 0, 8)>;
 		};
 
 		group2 {
 			psels = <NRF_PSEL(UART_RX, 0, 6)>,
-				<NRF_PSEL(UART_CTS, 0, 3)>;
+				<NRF_PSEL(UART_CTS, 0, 7)>;
 			bias-pull-up;
 		};
 	};
@@ -44,8 +44,8 @@
 		group1 {
 			psels = <NRF_PSEL(UART_TX, 0, 5)>,
 				<NRF_PSEL(UART_RX, 0, 6)>,
-				<NRF_PSEL(UART_RTS, 0, 2)>,
-				<NRF_PSEL(UART_CTS, 0, 3)>;
+				<NRF_PSEL(UART_RTS, 0, 8)>,
+				<NRF_PSEL(UART_CTS, 0, 7)>;
 			low-power-enable;
 		};
 	};
diff --git a/dts/common/nordic/nrf7120_enga.dtsi b/dts/common/nordic/nrf7120_enga.dtsi
index 09673d7789f..364e19bd144 100644
--- a/dts/common/nordic/nrf7120_enga.dtsi
+++ b/dts/common/nordic/nrf7120_enga.dtsi
@@ -643,7 +643,7 @@
 				gpio-controller;
 				#gpio-cells = <2>;
 				port = <1>;
-				ngpios = <20>;
+				ngpios = <16>;
 				gpiote-instance = <&gpiote20>;
 				status = "disabled";
 			};
@@ -654,7 +654,7 @@
 				gpio-controller;
 				#gpio-cells = <2>;
 				port = <3>;
-				ngpios = <13>;
+				ngpios = <12>;
 				gpiote-instance = <&gpiote20>;
 				status = "disabled";
 			};
@@ -831,7 +831,7 @@
 				gpio-controller;
 				#gpio-cells = <2>;
 				port = <0>;
-				ngpios = <10>;
+				ngpios = <13>;
 				gpiote-instance = <&gpiote30>;
 				status = "disabled";
 			};
diff --git a/samples/zephyr/drivers/i2c/rtio_loopback/boards/nrf7120pdk_nrf7120_cpuapp.overlay b/samples/zephyr/drivers/i2c/rtio_loopback/boards/nrf7120pdk_nrf7120_cpuapp.overlay
index 3035cc168c2..e2cde1e64c8 100644
--- a/samples/zephyr/drivers/i2c/rtio_loopback/boards/nrf7120pdk_nrf7120_cpuapp.overlay
+++ b/samples/zephyr/drivers/i2c/rtio_loopback/boards/nrf7120pdk_nrf7120_cpuapp.overlay
@@ -6,7 +6,7 @@
 
 /*
  * SDA = P1.8 and P1.9
- * SCL = P1.14 and P1.15
+ * SCL = P1.2 and P1.3
  */
 
 / {
@@ -20,7 +20,7 @@
 	i2c21_default: i2c21_default {
 		group1 {
 			psels = <NRF_PSEL(TWIS_SDA, 1, 8)>,
-				<NRF_PSEL(TWIS_SCL, 1, 14)>;
+				<NRF_PSEL(TWIS_SCL, 1, 2)>;
 			bias-pull-up;
 		};
 	};
@@ -28,7 +28,7 @@
 	i2c21_sleep: i2c21_sleep {
 		group1 {
 			psels = <NRF_PSEL(TWIS_SDA, 1, 8)>,
-				<NRF_PSEL(TWIS_SCL, 1, 14)>;
+				<NRF_PSEL(TWIS_SCL, 1, 2)>;
 			low-power-enable;
 		};
 	};
@@ -36,7 +36,7 @@
 	i2c22_default: i2c22_default {
 		group1 {
 			psels = <NRF_PSEL(TWIS_SDA, 1, 9)>,
-				<NRF_PSEL(TWIS_SCL, 1, 15)>;
+				<NRF_PSEL(TWIS_SCL, 1, 3)>;
 			bias-pull-up;
 		};
 	};
@@ -44,7 +44,7 @@
 	i2c22_sleep: i2c22_sleep {
 		group1 {
 			psels = <NRF_PSEL(TWIS_SDA, 1, 9)>,
-				<NRF_PSEL(TWIS_SCL, 1, 15)>;
+				<NRF_PSEL(TWIS_SCL, 1, 3)>;
 			low-power-enable;
 		};
 	};
diff --git a/tests/drivers/gpio/gpio_nfct/boards/nrf7120pdk_nrf7120_cpuapp.overlay b/tests/drivers/gpio/gpio_nfct/boards/nrf7120pdk_nrf7120_cpuapp.overlay
index 3c666009ff1..46e4da08639 100644
--- a/tests/drivers/gpio/gpio_nfct/boards/nrf7120pdk_nrf7120_cpuapp.overlay
+++ b/tests/drivers/gpio/gpio_nfct/boards/nrf7120pdk_nrf7120_cpuapp.overlay
@@ -6,18 +6,18 @@
 
 / {
 	/* Test requirements:
-	 * P1.00 shorted with P1.01;
-	 * P1.02 shorted with P1.03.
-	 * (NFC pins are P1.01 and P1.02)
+	 * P0.00 shorted with P0.03;
+	 * P0.12 shorted with P0.04.
+	 * (NFC pins are P0.03 and P0.04)
 	 */
 	test_gpios {
 		compatible = "gpio-leds";
 		out_gpios: out_gpios {
-			gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>, <&gpio1 2 GPIO_ACTIVE_HIGH>;
+			gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>, <&gpio0 12 GPIO_ACTIVE_HIGH>;
 		};
 
 		in_gpios: in_gpios {
-			gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>, <&gpio1 3 GPIO_ACTIVE_HIGH>;
+			gpios = <&gpio0 3 GPIO_ACTIVE_HIGH>, <&gpio0 4 GPIO_ACTIVE_HIGH>;
 		};
 	};
 };
@@ -30,6 +30,6 @@
 	status = "okay";
 };
 
-&gpio1 {
+&gpio0 {
 	status = "okay";
 };
diff --git a/tests/zephyr/boards/nrf/i2c/i2c_slave/boards/nrf7120pdk_nrf7120_cpuapp.overlay b/tests/zephyr/boards/nrf/i2c/i2c_slave/boards/nrf7120pdk_nrf7120_cpuapp.overlay
index e6aaec1a86a..a592761249e 100644
--- a/tests/zephyr/boards/nrf/i2c/i2c_slave/boards/nrf7120pdk_nrf7120_cpuapp.overlay
+++ b/tests/zephyr/boards/nrf/i2c/i2c_slave/boards/nrf7120pdk_nrf7120_cpuapp.overlay
@@ -8,14 +8,14 @@
 	i2c21_default_alt: i2c21_default_alt {
 		group1 {
 			psels = <NRF_PSEL(TWIM_SDA, 1, 8)>,
-				<NRF_PSEL(TWIM_SCL, 1, 14)>;
+				<NRF_PSEL(TWIM_SCL, 1, 2)>;
 		};
 	};
 
 	i2c21_sleep_alt: i2c21_sleep_alt {
 		group1 {
 			psels = <NRF_PSEL(TWIM_SDA, 1, 8)>,
-				<NRF_PSEL(TWIM_SCL, 1, 14)>;
+				<NRF_PSEL(TWIM_SCL, 1, 2)>;
 			low-power-enable;
 		};
 	};
@@ -26,7 +26,7 @@
 			 * to configure pins for TWIS with pinctrl.
 			 */
 			psels = <NRF_PSEL(TWIM_SDA, 1, 9)>,
-				<NRF_PSEL(TWIM_SCL, 1, 15)>;
+				<NRF_PSEL(TWIM_SCL, 1, 3)>;
 			bias-pull-up;
 		};
 	};
@@ -34,7 +34,7 @@
 	i2c22_sleep_alt: i2c22_sleep_alt {
 		group1 {
 			psels = <NRF_PSEL(TWIM_SDA, 1, 9)>,
-				<NRF_PSEL(TWIM_SCL, 1, 15)>;
+				<NRF_PSEL(TWIM_SCL, 1, 3)>;
 			low-power-enable;
 		};
 	};
diff --git a/tests/zephyr/boards/nrf/qdec/boards/nrf7120pdk_nrf7120_common.dtsi b/tests/zephyr/boards/nrf/qdec/boards/nrf7120pdk_nrf7120_common.dtsi
index 1ebe3169eae..91aeb58ff5e 100644
--- a/tests/zephyr/boards/nrf/qdec/boards/nrf7120pdk_nrf7120_common.dtsi
+++ b/tests/zephyr/boards/nrf/qdec/boards/nrf7120pdk_nrf7120_common.dtsi
@@ -7,8 +7,8 @@
 /* Required loopbacks
  * P1.11  <-> P1.12
  * P1.13 <-> P1.15
- * P1.2 <-> P1.3
- * P1.4 <-> P2.5
+ * P1.02 <-> P1.3
+ * P1.00 <-> P1.14
  */
 
 / {
@@ -24,7 +24,7 @@
 			gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
 		};
 		phase_b1: phase_b1 {
-			gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
+			gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>;
 		};
 	};
 
@@ -60,14 +60,14 @@
 	qdec_21_pinctrl: qdec_21_pinctrl {
 		group1 {
 			psels = <NRF_PSEL(QDEC_A, 1, 3)>,
-				<NRF_PSEL(QDEC_B, 1, 5)>;
+				<NRF_PSEL(QDEC_B, 1, 14)>;
 		};
 	};
 
 	qdec_21_sleep_pinctrl: qdec_21_sleep_pinctrl {
 		group1 {
 			psels = <NRF_PSEL(QDEC_A, 1, 3)>,
-				<NRF_PSEL(QDEC_B, 1, 5)>;
+				<NRF_PSEL(QDEC_B, 1, 14)>;
 			low-power-enable;
 		};
 	};
diff --git a/tests/zephyr/drivers/i2c/i2c_nrfx_twim/boards/nrf7120pdk_nrf7120_cpuapp.overlay b/tests/zephyr/drivers/i2c/i2c_nrfx_twim/boards/nrf7120pdk_nrf7120_cpuapp.overlay
index 0a155c60195..5407e071518 100644
--- a/tests/zephyr/drivers/i2c/i2c_nrfx_twim/boards/nrf7120pdk_nrf7120_cpuapp.overlay
+++ b/tests/zephyr/drivers/i2c/i2c_nrfx_twim/boards/nrf7120pdk_nrf7120_cpuapp.overlay
@@ -6,7 +6,7 @@
 
 /*
  * SDA = P1.8 and P1.9
- * SCL = P1.14 and P1.15
+ * SCL = P1.2 and P1.3
  */
 
 / {
@@ -20,7 +20,7 @@
 	i2c21_default: i2c21_default {
 		group1 {
 			psels = <NRF_PSEL(TWIS_SDA, 1, 8)>,
-				<NRF_PSEL(TWIS_SCL, 1, 14)>;
+				<NRF_PSEL(TWIS_SCL, 1, 2)>;
 			bias-pull-up;
 		};
 	};
@@ -28,7 +28,7 @@
 	i2c21_sleep: i2c21_sleep {
 		group1 {
 			psels = <NRF_PSEL(TWIS_SDA, 1, 8)>,
-				<NRF_PSEL(TWIS_SCL, 1, 14)>;
+				<NRF_PSEL(TWIS_SCL, 1, 2)>;
 			low-power-enable;
 		};
 	};
@@ -36,7 +36,7 @@
 	i2c22_default: i2c22_default {
 		group1 {
 			psels = <NRF_PSEL(TWIS_SDA, 1, 9)>,
-				<NRF_PSEL(TWIS_SCL, 1, 15)>;
+				<NRF_PSEL(TWIS_SCL, 1, 3)>;
 			bias-pull-up;
 		};
 	};
@@ -44,7 +44,7 @@
 	i2c22_sleep: i2c22_sleep {
 		group1 {
 			psels = <NRF_PSEL(TWIS_SDA, 1, 9)>,
-				<NRF_PSEL(TWIS_SCL, 1, 15)>;
+				<NRF_PSEL(TWIS_SCL, 1, 3)>;
 			low-power-enable;
 		};
 	};
diff --git a/tests/zephyr/drivers/i2c/i2c_target_api/boards/nrf7120pdk_nrf7120_cpuapp.overlay b/tests/zephyr/drivers/i2c/i2c_target_api/boards/nrf7120pdk_nrf7120_cpuapp.overlay
index 83b7ecf43ac..5027cf02204 100644
--- a/tests/zephyr/drivers/i2c/i2c_target_api/boards/nrf7120pdk_nrf7120_cpuapp.overlay
+++ b/tests/zephyr/drivers/i2c/i2c_target_api/boards/nrf7120pdk_nrf7120_cpuapp.overlay
@@ -1,13 +1,13 @@
 /*
  * SDA = P1.8 and P1.9
- * SCL = P1.14 and P1.15
+ * SCL = P1.2 and P1.3
  */
 
 &pinctrl {
 	i2c21_default: i2c21_default {
 		group1 {
 			psels = <NRF_PSEL(TWIM_SDA, 1, 8)>,
-				<NRF_PSEL(TWIM_SCL, 1, 14)>;
+				<NRF_PSEL(TWIM_SCL, 1, 2)>;
 			bias-pull-up;
 		};
 	};
@@ -15,7 +15,7 @@
 	i2c21_sleep: i2c21_sleep {
 		group1 {
 			psels = <NRF_PSEL(TWIM_SDA, 1, 8)>,
-				<NRF_PSEL(TWIM_SCL, 1, 14)>;
+				<NRF_PSEL(TWIM_SCL, 1, 2)>;
 			low-power-enable;
 		};
 	};
@@ -23,7 +23,7 @@
 	i2c22_default: i2c22_default {
 		group1 {
 			psels = <NRF_PSEL(TWIS_SDA, 1, 9)>,
-				<NRF_PSEL(TWIS_SCL, 1, 15)>;
+				<NRF_PSEL(TWIS_SCL, 1, 3)>;
 			bias-pull-up;
 		};
 	};
@@ -31,7 +31,7 @@
 	i2c22_sleep: i2c22_sleep {
 		group1 {
 			psels = <NRF_PSEL(TWIS_SDA, 1, 9)>,
-				<NRF_PSEL(TWIS_SCL, 1, 15)>;
+				<NRF_PSEL(TWIS_SCL, 1, 3)>;
 			low-power-enable;
 		};
 	};
diff --git a/tests/zephyr/drivers/spi/spi_controller_peripheral/boards/nrf7120pdk_nrf7120_cpuapp.overlay b/tests/zephyr/drivers/spi/spi_controller_peripheral/boards/nrf7120pdk_nrf7120_cpuapp.overlay
index 5dea09cb1e7..85633930b6e 100644
--- a/tests/zephyr/drivers/spi/spi_controller_peripheral/boards/nrf7120pdk_nrf7120_cpuapp.overlay
+++ b/tests/zephyr/drivers/spi/spi_controller_peripheral/boards/nrf7120pdk_nrf7120_cpuapp.overlay
@@ -27,7 +27,7 @@
 			psels = <NRF_PSEL(SPIS_SCK, 1, 12)>,
 				<NRF_PSEL(SPIS_MISO, 1, 14)>,
 				<NRF_PSEL(SPIS_MOSI, 1, 9)>,
-				<NRF_PSEL(SPIS_CSN, 1, 5)>;
+				<NRF_PSEL(SPIS_CSN, 1, 13)>;
 		};
 	};
 
@@ -36,7 +36,7 @@
 			psels = <NRF_PSEL(SPIS_SCK, 1, 12)>,
 				<NRF_PSEL(SPIS_MISO, 1, 14)>,
 				<NRF_PSEL(SPIS_MOSI, 1, 9)>,
-				<NRF_PSEL(SPIS_CSN, 1, 5)>;
+				<NRF_PSEL(SPIS_CSN, 1, 13)>;
 			low-power-enable;
 		};
 	};
@@ -52,7 +52,7 @@
 	pinctrl-1 = <&spi22_sleep_alt>;
 	pinctrl-names = "default", "sleep";
 	overrun-character = <0x00>;
-	cs-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+	cs-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
 	zephyr,pm-device-runtime-auto;
 	dut_spi_dt: test-spi-dev@0 {
 		compatible = "vnd,spi-device";
diff --git a/tests/zephyr/drivers/spi/spi_loopback/boards/nrf7120pdk_nrf7120_cpuapp.overlay b/tests/zephyr/drivers/spi/spi_loopback/boards/nrf7120pdk_nrf7120_cpuapp.overlay
index ba6bbc58add..0665e07b24d 100644
--- a/tests/zephyr/drivers/spi/spi_loopback/boards/nrf7120pdk_nrf7120_cpuapp.overlay
+++ b/tests/zephyr/drivers/spi/spi_loopback/boards/nrf7120pdk_nrf7120_cpuapp.overlay
@@ -6,15 +6,15 @@
 
 /*
  * Test requires following loopback:
- * P1.4 - P1.5
+ * P1.11 - P1.12
  */
 
 &pinctrl {
 	spi20_default: spi20_default {
 		group1 {
 			psels = <NRF_PSEL(SPIM_SCK, 2, 6)>,
-				<NRF_PSEL(SPIM_MISO, 1, 4)>,
-				<NRF_PSEL(SPIM_MOSI, 1, 5)>;
+				<NRF_PSEL(SPIM_MISO, 1, 11)>,
+				<NRF_PSEL(SPIM_MOSI, 1, 12)>;
 			low-power-enable;
 		};
 	};
@@ -22,8 +22,8 @@
 	spi20_sleep: spi20_sleep {
 		group1 {
 			psels = <NRF_PSEL(SPIM_SCK, 2, 6)>,
-				<NRF_PSEL(SPIM_MISO, 1, 4)>,
-				<NRF_PSEL(SPIM_MOSI, 1, 5)>;
+				<NRF_PSEL(SPIM_MISO, 1, 11)>,
+				<NRF_PSEL(SPIM_MOSI, 1, 12)>;
 			low-power-enable;
 		};
 	};
diff --git a/tests/zephyr/drivers/uart/uart_async_api/boards/nrf7120pdk_nrf7120_cpuapp.overlay b/tests/zephyr/drivers/uart/uart_async_api/boards/nrf7120pdk_nrf7120_cpuapp.overlay
index cf425f2d292..20dbf11339b 100644
--- a/tests/zephyr/drivers/uart/uart_async_api/boards/nrf7120pdk_nrf7120_cpuapp.overlay
+++ b/tests/zephyr/drivers/uart/uart_async_api/boards/nrf7120pdk_nrf7120_cpuapp.overlay
@@ -7,15 +7,15 @@
 &pinctrl {
 	uart21_default_alt: uart21_default_alt {
 		group1 {
-			psels = <NRF_PSEL(UART_TX, 1, 04)>,
-				<NRF_PSEL(UART_RX, 1, 05)>;
+			psels = <NRF_PSEL(UART_TX, 1, 13)>,
+				<NRF_PSEL(UART_RX, 1, 15)>;
 		};
 	};
 
 	uart21_sleep_alt: uart21_sleep_alt {
 		group1 {
-			psels = <NRF_PSEL(UART_TX, 1, 04)>,
-				<NRF_PSEL(UART_RX, 1, 05)>;
+			psels = <NRF_PSEL(UART_TX, 1, 13)>,
+				<NRF_PSEL(UART_RX, 1, 15)>;
 			low-power-enable;
 		};
 	};
diff --git a/tests/zephyr/drivers/uart/uart_elementary/boards/nrf7120pdk_nrf7120_cpuapp.overlay b/tests/zephyr/drivers/uart/uart_elementary/boards/nrf7120pdk_nrf7120_cpuapp.overlay
index 9e000f53099..fc26bdafc3f 100644
--- a/tests/zephyr/drivers/uart/uart_elementary/boards/nrf7120pdk_nrf7120_cpuapp.overlay
+++ b/tests/zephyr/drivers/uart/uart_elementary/boards/nrf7120pdk_nrf7120_cpuapp.overlay
@@ -7,8 +7,8 @@
 &pinctrl {
 	uart21_default: uart21_default {
 		group1 {
-			psels = <NRF_PSEL(UART_TX, 1, 04)>,
-				<NRF_PSEL(UART_RX, 1, 05)>,
+			psels = <NRF_PSEL(UART_TX, 1, 13)>,
+				<NRF_PSEL(UART_RX, 1, 15)>,
 				<NRF_PSEL(UART_RTS, 1, 02)>,
 				<NRF_PSEL(UART_CTS, 1, 03)>;
 		};
@@ -16,8 +16,8 @@
 
 	uart21_sleep: uart21_sleep {
 		group1 {
-			psels = <NRF_PSEL(UART_TX, 1, 04)>,
-				<NRF_PSEL(UART_RX, 1, 05)>,
+			psels = <NRF_PSEL(UART_TX, 1, 13)>,
+				<NRF_PSEL(UART_RX, 1, 15)>,
 				<NRF_PSEL(UART_RTS, 1, 02)>,
 				<NRF_PSEL(UART_CTS, 1, 03)>;
 			low-power-enable;
diff --git a/tests/zephyr/drivers/uart/uart_elementary/boards/nrf7120pdk_nrf7120_cpuapp_dual_uart.overlay b/tests/zephyr/drivers/uart/uart_elementary/boards/nrf7120pdk_nrf7120_cpuapp_dual_uart.overlay
index 0e410fd3214..9099ef29406 100644
--- a/tests/zephyr/drivers/uart/uart_elementary/boards/nrf7120pdk_nrf7120_cpuapp_dual_uart.overlay
+++ b/tests/zephyr/drivers/uart/uart_elementary/boards/nrf7120pdk_nrf7120_cpuapp_dual_uart.overlay
@@ -7,7 +7,7 @@
 &pinctrl {
 	uart21_default: uart21_default {
 		group1 {
-			psels = <NRF_PSEL(UART_TX, 1, 04)>,
+			psels = <NRF_PSEL(UART_TX, 1, 13)>,
 				<NRF_PSEL(UART_RX, 1, 8)>;
 				bias-pull-up;
 		};
@@ -15,7 +15,7 @@
 
 	uart21_sleep: uart21_sleep {
 		group1 {
-			psels = <NRF_PSEL(UART_TX, 1, 04)>,
+			psels = <NRF_PSEL(UART_TX, 1, 13)>,
 				<NRF_PSEL(UART_RX, 1, 8)>;
 			low-power-enable;
 		};
@@ -24,7 +24,7 @@
 	uart22_default: uart22_default {
 		group1 {
 			psels = <NRF_PSEL(UART_TX, 1, 9)>,
-				<NRF_PSEL(UART_RX, 1, 05)>;
+				<NRF_PSEL(UART_RX, 1, 15)>;
 				bias-pull-up;
 		};
 	};
@@ -32,7 +32,7 @@
 	uart22_sleep: uart22_sleep {
 		group1 {
 			psels = <NRF_PSEL(UART_TX, 1, 9)>,
-				<NRF_PSEL(UART_RX, 1, 05)>;
+				<NRF_PSEL(UART_RX, 1, 15)>;
 			low-power-enable;
 		};
 	};
diff --git a/tests/zephyr/drivers/uart/uart_errors/boards/nrf7120pdk_nrf7120_cpuapp.overlay b/tests/zephyr/drivers/uart/uart_errors/boards/nrf7120pdk_nrf7120_cpuapp.overlay
index 05cbb25c971..0f56ec825d8 100644
--- a/tests/zephyr/drivers/uart/uart_errors/boards/nrf7120pdk_nrf7120_cpuapp.overlay
+++ b/tests/zephyr/drivers/uart/uart_errors/boards/nrf7120pdk_nrf7120_cpuapp.overlay
@@ -8,14 +8,14 @@
 	uart21_default: uart21_default {
 		group1 {
 			psels = <NRF_PSEL(UART_RX, 1, 8)>,
-				<NRF_PSEL(UART_RTS, 1, 04)>;
+				<NRF_PSEL(UART_RTS, 1, 13)>;
 		};
 	};
 
 	uart21_sleep: uart21_sleep {
 		group1 {
 			psels = <NRF_PSEL(UART_RX, 1, 8)>,
-				<NRF_PSEL(UART_RTS, 1, 04)>;
+				<NRF_PSEL(UART_RTS, 1, 13)>;
 			low-power-enable;
 		};
 	};
@@ -23,7 +23,7 @@
 	uart22_default: uart22_default {
 		group1 {
 			psels =
-				<NRF_PSEL(UART_CTS, 1, 05)>;
+				<NRF_PSEL(UART_CTS, 1, 15)>;
 				bias-pull-up;
 		};
 		group2 {
@@ -34,7 +34,7 @@
 	uart22_sleep: uart22_sleep {
 		group1 {
 			psels = <NRF_PSEL(UART_TX, 1, 9)>,
-				<NRF_PSEL(UART_CTS, 1, 05)>;
+				<NRF_PSEL(UART_CTS, 1, 15)>;
 			low-power-enable;
 		};
 	};
diff --git a/tests/zephyr/drivers/uart/uart_mix_fifo_poll/boards/nrf7120pdk_nrf7120_cpuapp.overlay b/tests/zephyr/drivers/uart/uart_mix_fifo_poll/boards/nrf7120pdk_nrf7120_cpuapp.overlay
index 16a9a2702e2..3c8d4b62af2 100644
--- a/tests/zephyr/drivers/uart/uart_mix_fifo_poll/boards/nrf7120pdk_nrf7120_cpuapp.overlay
+++ b/tests/zephyr/drivers/uart/uart_mix_fifo_poll/boards/nrf7120pdk_nrf7120_cpuapp.overlay
@@ -7,19 +7,19 @@
 &pinctrl {
 	uart21_default: uart21_default {
 		group1 {
-			psels = <NRF_PSEL(UART_TX, 1, 8)>,
-				<NRF_PSEL(UART_RX, 1, 9)>,
-				<NRF_PSEL(UART_RTS, 1, 4)>,
-				<NRF_PSEL(UART_CTS, 1, 5)>;
+			psels = <NRF_PSEL(UART_TX, 1, 13)>,
+				<NRF_PSEL(UART_RX, 1, 15)>,
+				<NRF_PSEL(UART_RTS, 1, 11)>,
+				<NRF_PSEL(UART_CTS, 1, 12)>;
 		};
 	};
 
 	uart21_sleep: uart21_sleep {
 		group1 {
-			psels = <NRF_PSEL(UART_TX, 1, 8)>,
-				<NRF_PSEL(UART_RX, 1, 9)>,
-				<NRF_PSEL(UART_RTS, 1, 4)>,
-				<NRF_PSEL(UART_CTS, 1, 5)>;
+			psels = <NRF_PSEL(UART_TX, 1, 13)>,
+				<NRF_PSEL(UART_RX, 1, 15)>,
+				<NRF_PSEL(UART_RTS, 1, 11)>,
+				<NRF_PSEL(UART_CTS, 1, 12)>;
 			low-power-enable;
 		};
 	};
diff --git a/tests/zephyr/drivers/uart/uart_pm/boards/nrf7120pdk_nrf7120_cpuapp.overlay b/tests/zephyr/drivers/uart/uart_pm/boards/nrf7120pdk_nrf7120_cpuapp.overlay
index e7f84d0411c..89f72b1eb9f 100644
--- a/tests/zephyr/drivers/uart/uart_pm/boards/nrf7120pdk_nrf7120_cpuapp.overlay
+++ b/tests/zephyr/drivers/uart/uart_pm/boards/nrf7120pdk_nrf7120_cpuapp.overlay
@@ -7,15 +7,15 @@
 &pinctrl {
 	uart21_default: uart21_default {
 		group1 {
-			psels = <NRF_PSEL(UART_TX, 1, 04)>,
-				<NRF_PSEL(UART_RX, 1, 05)>;
+			psels = <NRF_PSEL(UART_TX, 1, 13)>,
+				<NRF_PSEL(UART_RX, 1, 15)>;
 		};
 	};
 
 	uart21_sleep: uart21_sleep {
 		group1 {
-			psels = <NRF_PSEL(UART_TX, 1, 04)>,
-				<NRF_PSEL(UART_RX, 1, 05)>;
+			psels = <NRF_PSEL(UART_TX, 1, 13)>,
+				<NRF_PSEL(UART_RX, 1, 15)>;
 			low-power-enable;
 		};
 	};