How to Reduce System Clock Advancement Speed in Multithreaded Mode? #24
Description
I noticed that when starting the operating system, the system clock advances very quickly. This issue occurs in multithreaded mode with the synchronization policy set to multithread-quantum.
How can I reduce the system clock advancement speed?
Below is the boot log for reference:
[ 0.000000] earlycon: pl11 at MMIO 0x0000000028001000 (options '')
[ 0.000000] bootconsole [pl11] enabled
[ 0.000000] percpu: Embedded 21 pages/cpu @(ptrval) s55904 r0 d30112 u86016
[ 0.000000] Detected PIPT I-cache on CPU0
[ 0.000000] CPU features: detected: Hardware dirty bit management
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 129024
[ 0.000000] Kernel command line: console=ttyAMA0,115200 earlycon=pl011,0x28001000 root=/dev/ram0 rw
[ 0.000000] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.000000] Memory: 472152K/524288K available (2110K kernel code, 192K rwdata, 520K rodata, 320K init, 223K bss, 52136K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] rcu: Preemptible hierarchical RCU implementation.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=1.
[ 0.000000] Tasks RCU enabled.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] GICv3: Distributor has no Range Selector support
[ 0.000000] GICv3: no VLPI support, no direct LPI support
[ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000029b00000
[ 0.000000] arch_timer: cp15 timer(s) running at 1.00MHz (virt).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x1d854df40, max_idle_ns: 3526361616960 ns
[ 0.044283] sched_clock: 56 bits at 1000kHz, resolution 1000ns, wraps every 2199023255500ns
[ 1.925849] Console: colour dummy device 80x25
[ 2.193497] Calibrating delay loop (skipped), value calculated using timer frequency.. 2.00 BogoMIPS (lpj=4000)
[ 2.511342] pid_max: default: 32768 minimum: 301
[ 2.942518] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes)
[ 3.330544] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes)
[ 9.335932] ASID allocator initialised with 32768 entries
[ 9.814075] rcu: Hierarchical SRCU implementation.
[ 11.077883] smp: Bringing up secondary CPUs ...
[ 11.523588] smp: Brought up 1 node, 1 CPU
[ 11.852665] SMP: Total of 1 processors activated.
[ 12.235429] CPU features: detected: GIC system register CPU interface
[ 13.026704] CPU features: detected: Privileged Access Never
[ 13.599891] CPU features: detected: LSE atomic instructions
[ 13.835683] CPU features: detected: User Access Override
[ 14.320355] CPU features: detected: 32-bit EL0 Support
[ 16.883358] CPU: All CPU(s) started at EL1
[ 17.301341] alternatives: patching kernel code
[ 27.945730] devtmpfs: initialized
[ 32.448892] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 32.989147] futex hash table entries: 256 (order: 2, 16384 bytes)
[ 36.398270] vdso: 2 pages (1 code @ 0000000056441a52, 1 data @ 0000000026e33fc3)
[ 36.791155] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 37.589430] DMA: preallocated 256 KiB pool for atomic allocations
[ 37.851772] Serial: AMBA PL011 UART driver
[ 42.372094] 28001000.uart: ttyAMA0 at MMIO 0x28001000 (irq = 6, base_baud = 0) is a PL011 rev1
[ 43.417939] console [ttyAMA0] enabled
[ 43.417939] console [ttyAMA0] enabled
[ 43.824276] bootconsole [pl11] disabled
[ 43.824276] bootconsole [pl11] disabled
[ 54.065891] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 57.139440] clocksource: Switched to clocksource arch_sys_counter
[ 64.658725] hrtimer: interrupt took 9335000 ns
[ 122.534842] Unpacking initramfs...
[ 510.044485] Freeing initrd memory: 14336K
[ 516.285416] workingset: timestamp_bits=62 max_order=17 bucket_order=0
[ 537.383665] io scheduler noop registered
[ 537.807424] io scheduler deadline registered
[ 539.323505] io scheduler cfq registered (default)
[ 540.216933] cacheinfo: Unable to detect cache hierarchy for CPU 0
[ 552.816329] Register mapping successful
[ 573.022320] Freeing unused kernel memory: 320K
[ 576.085409] Run /init as init process