Build problem

[jay2001]

I have never used PlatformIO before, but when I try to build this project, I get several errors. Any idea if this is my fault or an issue in the project files?

• Executing task: C:\Users\jay20.platformio\penv\Scripts\platformio.exe run

Processing esp32dev (platform: espressif32; board: esp32dev; framework: arduino)

Verbose mode can be enabled via -v, --verbose option
CONFIGURATION: https://docs.platformio.org/page/boards/espressif32/esp32dev.html
PLATFORM: Espressif 32 (6.11.0) > Espressif ESP32 Dev Module
HARDWARE: ESP32 240MHz, 320KB RAM, 4MB Flash
DEBUG: Current (cmsis-dap) External (cmsis-dap, esp-bridge, esp-prog, iot-bus-jtag, jlink, minimodule, olimex-arm-usb-ocd, olimex-arm-usb-ocd-h, olimex-arm-usb-tiny-h, olimex-jtag-tiny, tumpa)
PACKAGES:

• framework-arduinoespressif32 @ 3.20017.241212+sha.dcc1105b
• tool-esptoolpy @ 1.40501.0 (4.5.1)
• toolchain-xtensa-esp32 @ 8.4.0+2021r2-patch5
  LDF: Library Dependency Finder -> https://bit.ly/configure-pio-ldf
  LDF Modes: Finder ~ chain, Compatibility ~ soft
  Found 40 compatible libraries
  Scanning dependencies...
  Dependency Graph
  |-- TFT_eSPI @ 2.5.43
  |-- lvgl @ 8.4.0
  |-- ArduinoJson @ 6.21.5
  |-- IotWebConf @ 3.2.1
  |-- micro-http-status @ 1.0.3
  |-- micro-moustache @ 1.0.1
  |-- micro-timezonedb @ 1.0.4
  |-- HTTPClient @ 2.0.0
  |-- ESPmDNS @ 2.0.0
  |-- SPI @ 2.0.0
  Building in release mode
  Compiling .pio\build\esp32dev\src\flight_info.cpp.o
  Compiling .pio\build\esp32dev\src\main.cpp.o
  In file included from src/main.cpp:3:
  C:/Users/jay20/.platformio/packages/framework-arduinoespressif32/libraries/SPI/src/SPI.h:25:10: fatal error: pins_arduino.h: No such file or directory

---

• Looking for pins_arduino.h dependency? Check our library registry!
• CLI > platformio lib search "header:pins_arduino.h"
• Web > https://registry.platformio.org/search?q=header:pins_arduino.h

---

#include "pins_arduino.h"
^~~~~~~~~~~~~~~~
compilation terminated.
In file included from C:/Users/jay20/.platformio/packages/framework-arduinoespressif32/cores/esp32/esp32-hal.h:83,
from C:/Users/jay20/.platformio/packages/framework-arduinoespressif32/cores/esp32/Arduino.h:36,
from include/flight_info.h:3,
from src/flight_info.cpp:1:
C:/Users/jay20/.platformio/packages/framework-arduinoespressif32/cores/esp32/esp32-hal-gpio.h:29:10: fatal error: pins_arduino.h: No such file or directory

---

• Looking for pins_arduino.h dependency? Check our library registry!
• CLI > platformio lib search "header:pins_arduino.h"
• Web > https://registry.platformio.org/search?q=header:pins_arduino.h

---

#include "pins_arduino.h"
^~~~~~~~~~~~~~~~
compilation terminated.
Compiling .pio\build\esp32dev\libdfe\SPI\SPI.cpp.o
*** [.pio\build\esp32dev\src\main.cpp.o] Error 1
*** [.pio\build\esp32dev\src\flight_info.cpp.o] Error 1
In file included from C:/Users/jay20/.platformio/packages/framework-arduinoespressif32/libraries/SPI/src/SPI.cpp:22:
C:/Users/jay20/.platformio/packages/framework-arduinoespressif32/libraries/SPI/src/SPI.h:25:10: fatal error: pins_arduino.h: No such file or directory

---

• Looking for pins_arduino.h dependency? Check our library registry!
• CLI > platformio lib search "header:pins_arduino.h"
• Web > https://registry.platformio.org/search?q=header:pins_arduino.h

---

#include "pins_arduino.h"
^~~~~~~~~~~~~~~~
compilation terminated.
*** [.pio\build\esp32dev\libdfe\SPI\SPI.cpp.o] Error 1
========================================================================================= [FAILED] Took 35.14 seconds =========================================================================================

Processing lilygo-t-display-s3 (platform: espressif32; board: lilygo-t-display-s3; framework: arduino)

Verbose mode can be enabled via -v, --verbose option
CONFIGURATION: https://docs.platformio.org/page/boards/espressif32/lilygo-t-display-s3.html
PLATFORM: Espressif 32 (6.11.0) > LilyGo T-Display-S3
HARDWARE: ESP32S3 240MHz, 320KB RAM, 16MB Flash
DEBUG: Current (cmsis-dap) External (cmsis-dap, esp-bridge, esp-builtin, esp-prog, iot-bus-jtag, jlink, minimodule, olimex-arm-usb-ocd, olimex-arm-usb-ocd-h, olimex-arm-usb-tiny-h, olimex-jtag-tiny, tumpa)
PACKAGES:

• framework-arduinoespressif32 @ 3.20017.241212+sha.dcc1105b
• tool-esptoolpy @ 1.40501.0 (4.5.1)
• tool-openocd-esp32 @ 2.1100.20220706 (11.0)
• toolchain-riscv32-esp @ 8.4.0+2021r2-patch5
• toolchain-xtensa-esp32s3 @ 8.4.0+2021r2-patch5
  LDF: Library Dependency Finder -> https://bit.ly/configure-pio-ldf
  LDF Modes: Finder ~ chain, Compatibility ~ soft
  Found 40 compatible libraries
  Scanning dependencies...
  Dependency Graph
  |-- TFT_eSPI @ 2.5.43
  |-- lvgl @ 8.4.0
  |-- ArduinoJson @ 6.21.5
  |-- IotWebConf @ 3.2.1
  |-- micro-http-status @ 1.0.3
  |-- micro-moustache @ 1.0.1
  |-- micro-timezonedb @ 1.0.4
  |-- HTTPClient @ 2.0.0
  |-- ESPmDNS @ 2.0.0
  |-- SPI @ 2.0.0
  Building in release mode
  Compiling .pio\build\lilygo-t-display-s3\src\airlines.cpp.o
  Compiling .pio\build\lilygo-t-display-s3\src\airports.cpp.o
  Compiling .pio\build\lilygo-t-display-s3\src\countries.cpp.o
  In file included from .pio/libdeps/lilygo-t-display-s3/lvgl/src/misc/../lv_conf_internal.h:15,
  from .pio/libdeps/lilygo-t-display-s3/lvgl/src/misc/lv_log.h:16,
  from .pio/libdeps/lilygo-t-display-s3/lvgl/lvgl.h:25,
  from include/country_flags.h:7,
  from include/country.h:3,
  from include/airport.h:3,
  from src/airports.cpp:1:
  .pio/libdeps/lilygo-t-display-s3/lvgl/src/misc/../lv_conf_kconfig.h:15:14: fatal error: sdkconfig.h: No such file or directory

---

• Looking for sdkconfig.h dependency? Check our library registry!
• CLI > platformio lib search "header:sdkconfig.h"
• Web > https://registry.platformio.org/search?q=header:sdkconfig.h

---

include "sdkconfig.h"

          ^~~~~~~~~~~~~

compilation terminated.
In file included from .pio/libdeps/lilygo-t-display-s3/lvgl/src/misc/../lv_conf_internal.h:15,
from .pio/libdeps/lilygo-t-display-s3/lvgl/src/misc/lv_log.h:16,
from .pio/libdeps/lilygo-t-display-s3/lvgl/lvgl.h:25,
from include/country_flags.h:7,
from include/country.h:3,
from include/airline.h:3,
from src/airlines.cpp:1:
.pio/libdeps/lilygo-t-display-s3/lvgl/src/misc/../lv_conf_kconfig.h:15:14: fatal error: sdkconfig.h: No such file or directory

---

• Looking for sdkconfig.h dependency? Check our library registry!
• CLI > platformio lib search "header:sdkconfig.h"
• Web > https://registry.platformio.org/search?q=header:sdkconfig.h

---

include "sdkconfig.h"

          ^~~~~~~~~~~~~

compilation terminated.
In file included from .pio/libdeps/lilygo-t-display-s3/lvgl/src/misc/../lv_conf_internal.h:15,
from .pio/libdeps/lilygo-t-display-s3/lvgl/src/misc/lv_log.h:16,
from .pio/libdeps/lilygo-t-display-s3/lvgl/lvgl.h:25,
from include/country_flags.h:7,
from include/country.h:3,
from src/countries.cpp:1:
.pio/libdeps/lilygo-t-display-s3/lvgl/src/misc/../lv_conf_kconfig.h:15:14: fatal error: sdkconfig.h: No such file or directory

---

• Looking for sdkconfig.h dependency? Check our library registry!
• CLI > platformio lib search "header:sdkconfig.h"
• Web > https://registry.platformio.org/search?q=header:sdkconfig.h

---

include "sdkconfig.h"

          ^~~~~~~~~~~~~

compilation terminated.
Compiling .pio\build\lilygo-t-display-s3\src\flight_info.cpp.o
*** [.pio\build\lilygo-t-display-s3\src\airports.cpp.o] Error 1
*** [.pio\build\lilygo-t-display-s3\src\airlines.cpp.o] Error 1
*** [.pio\build\lilygo-t-display-s3\src\countries.cpp.o] Error 1
In file included from include/flight_info.h:3,
from src/flight_info.cpp:1:
C:/Users/jay20/.platformio/packages/framework-arduinoespressif32/cores/esp32/Arduino.h:33:10: fatal error: freertos/FreeRTOS.h: No such file or directory
#include "freertos/FreeRTOS.h"
^~~~~~~~~~~~~~~~~~~~~
compilation terminated.
*** [.pio\build\lilygo-t-display-s3\src\flight_info.cpp.o] Error 1
========================================================================================= [FAILED] Took 29.20 seconds =========================================================================================

Environment Status Duration

---

esp32dev FAILED 00:00:35.138
lilygo-t-display-s3 FAILED 00:00:29.201
==================================================================================== 2 failed, 0 succeeded in 00:01:04.339 ====================================================================================

• The terminal process "C:\Users\jay20.platformio\penv\Scripts\platformio.exe 'run'" terminated with exit code: 1.
• Terminal will be reused by tasks, press any key to close it.

[rzeldent]

Hi Jay,

Fetched it and compiled it. Here no problems. See output below.
Have you tried to update platformio or do a reinstall of platformio?

Do other projects compile?

Processing esp32dev (platform: espressif32; board: esp32dev; framework: arduino)
--------------------------------------------------------------------------
Verbose mode can be enabled via `-v, --verbose` option
CONFIGURATION: https://docs.platformio.org/page/boards/espressif32/esp32dev.html
PLATFORM: Espressif 32 (6.11.0) > Espressif ESP32 Dev Module
HARDWARE: ESP32 240MHz, 320KB RAM, 4MB Flash
DEBUG: Current (cmsis-dap) External (cmsis-dap, esp-bridge, esp-prog, iot-bus-jtag, jlink, minimodule, olimex-arm-usb-ocd, olimex-arm-usb-ocd-h, olimex-arm-usb-tiny-h, olimex-jtag-tiny, tumpa)
PACKAGES: 
 - framework-arduinoespressif32 @ 3.20017.241212+sha.dcc1105b 
 - tool-esptoolpy @ 1.40501.0 (4.5.1) 
 - toolchain-xtensa-esp32 @ 8.4.0+2021r2-patch5
LDF: Library Dependency Finder -> https://bit.ly/configure-pio-ldf
LDF Modes: Finder ~ chain, Compatibility ~ soft
Found 40 compatible libraries
Scanning dependencies...
Dependency Graph
|-- TFT_eSPI @ 2.5.43
|-- lvgl @ 8.4.0
|-- ArduinoJson @ 6.21.5
|-- IotWebConf @ 3.2.1
|-- micro-http-status @ 1.0.3
|-- micro-moustache @ 1.0.1
|-- micro-timezonedb @ 1.0.4
|-- HTTPClient @ 2.0.0
|-- ESPmDNS @ 2.0.0
|-- SPI @ 2.0.0
Building in release mode
...
...
inking .pio/build/lilygo-t-display-s3/firmware.elf
Retrieving maximum program size .pio/build/lilygo-t-display-s3/firmware.elf
Checking size .pio/build/lilygo-t-display-s3/firmware.elf
Advanced Memory Usage is available via "PlatformIO Home > Project Inspect"
RAM:   [===       ]  32.9% (used 107912 bytes from 327680 bytes)
Flash: [==========]  97.5% (used 4025925 bytes from 4128768 bytes)
Building .pio/build/lilygo-t-display-s3/firmware.bin
esptool.py v4.5.1
Creating esp32s3 image...
Merged 2 ELF sections
Successfully created esp32s3 image.
====================== [SUCCESS] Took 37.51 seconds ======================

Environment          Status    Duration
-------------------  --------  ------------
esp32dev             SUCCESS   00:00:16.784
lilygo-t-display-s3  SUCCESS   00:00:37.510
====================== 2 succeeded in 00:00:54.294 ======================

[jay2001]

I have tried reinstalling PlatformIO, I have tried reinstalling VSCode. If I create a new project and check the main.cpp I see an error for the #include <Arduino.h> line stating cannot open source file "pins_arduino.h" (dependency of "Arduino.h")C/C++(1696) and it also doesn't build.

[rzeldent]

Have you tried to delete the .pio folder?
Also delete c:\users\username\.platformio\platforms\espressif32* to force reinstallation of the platforms

Automated build words, works on my computer :-) spot the differences...