Using the integration with two chargers - second does not show correct data

[CBxGBG]

Hi.
A while back you introduced support for two boxes which is great. Unfortunately the sensors for the second box seems to be a bit off, it has never functioned properly - at least not in my installation

My first box = the master where the RPi is attached is giving correct data from all the relevant sensors while my second box only provides correct data for the Total energy sensor
I need the data for these sensors: Charging Current, Charging Power, Session Energy and Status

the Status sensor is by the way always showing "Initialization..."

My Garo Device info is:
GLBDC-T222FC-A by Garo
Firmware: 1.3.7
Hardware: 7.13
Serial number: 1107609

I am running your integration version 2024.10.0

and my Home Assistant is
Core 2025.1.2
Supervisor 2024.12.3
Operating System 14.1
Frontend 20250109.0

Let me know if you need any additional information
Thank You

[stejo388]

Hi,

I also just installed a second box, I see the same issue the data is incorrect. Also are you able to control the second box, it seems for me that it follows the command of the first one

[CBxGBG]

The control when it comes settings for schedule etc seems to be for the Master box (with the RPi) and the Slave box follows the same settings. I'm not able to control the the Slave box separatley in the GARO web interface.

[stejo388]

The control when it comes settings for schedule etc seems to be for the Master box (with the RPi) and the Slave box follows the same settings. I'm not able to control the the Slave box separatley in the GARO web interface.

Ok that was not what I planned, I need to control them separately. For me I don´t even see any energy consumption. Maybe I have installed them incorrect, if I look at the GARO web interface I see the other box but I don´t see the energy consumption for that box there either.

@sockless-coding do you need some log files?