diff --git a/test-case/test-jack-detection-dsp-d3.sh b/test-case/test-jack-detection-dsp-d3.sh
new file mode 100755
index 00000000..34ca434f
--- /dev/null
+++ b/test-case/test-jack-detection-dsp-d3.sh
@@ -0,0 +1,203 @@
+#!/bin/bash
+
+# SPDX-License-Identifier: BSD-3-Clause
+# Copyright(c) 2025 Intel Corporation. All rights reserved.
+
+##
+## Preconditions
+# USB relay switch is available and configured.
+# Jack detection header should be connected to the USB relay switch
+# to the port HURTM_2 (NC) connector.
+
+## Test Description
+# Verify jack detection functionality by simulating plugging and unplugging
+# of audio jack using a USB relay switch.
+# The unplugging and plugging of the jack is when DSP is in D3 state (suspend)
+# to ensure the system can handle jack detection events correctly.
+# The test will check if the jack detection status is updated correctly
+# when the jack is plugged in and unplugged and if DSP status is changing
+# correctly as well.
+
+
+TESTDIR=$(realpath -e "$(dirname "${BASH_SOURCE[0]}")/..")
+TESTLIB="${TESTDIR}/case-lib"
+
+DSP_SUSPEND_TIMEOUT=15
+
+# shellcheck disable=SC1091 source=case-lib/lib.sh
+source "${TESTLIB}/lib.sh"
+# shellcheck disable=SC1091 source=case-lib/relay.sh
+source "${TESTLIB}/relay.sh"
+
+# shellcheck disable=SC2153
+OPT_NAME['t']='tplg'                OPT_DESC['t']="tplg file, default value is env TPLG: $TPLG"
+OPT_HAS_ARG['t']=1                  OPT_VAL['t']="$TPLG"
+
+OPT_NAME['l']='loop'                OPT_DESC['l']='loop count'
+OPT_HAS_ARG['l']=1                  OPT_VAL['l']=1
+
+OPT_NAME['s']='sof-logger'          OPT_DESC['s']="open sof-logger trace the data will store at $LOG_ROOT"
+OPT_HAS_ARG['s']=0                  OPT_VAL['s']=1
+
+OPT_NAME['d']='dsp-settle-sleep'    OPT_DESC['d']='waiting time to change DSP state'
+OPT_HAS_ARG['d']=1                  OPT_VAL['d']=5
+
+OPT_NAME['r']='relay-settle-sleep'  OPT_DESC['r']='waiting time to stabilize after relay change state'
+OPT_HAS_ARG['r']=1                  OPT_VAL['r']=1
+
+OPT_NAME['u']='relay'               OPT_DESC['u']='name of usbrelay switch, default value is HURTM_2'
+OPT_HAS_ARG['u']=1                  OPT_VAL['u']='HURTM_2'
+
+OPT_NAME['H']='headphone'           OPT_DESC['H']='name of pcm control for headphone jack'
+OPT_HAS_ARG['H']=1                  OPT_VAL['H']='headphone jack'
+
+OPT_NAME['M']='headset'             OPT_DESC['M']='name of pcm control for headset mic jack'
+OPT_HAS_ARG['M']=1                  OPT_VAL['M']='headset [a-z ]*jack'
+
+func_opt_parse_option "$@"
+
+tplg=${OPT_VAL['t']}
+relay=${OPT_VAL['u']}
+loop_cnt=${OPT_VAL['l']}
+dsp_settle_time=${OPT_VAL['d']}
+relay_settle_time=${OPT_VAL['r']}
+headphone_jack_name=${OPT_VAL['H']}
+headset_mic_jack_name=${OPT_VAL['M']}
+
+
+func_check_dsp_status()
+{
+    dlogi "Wait for DSP power status to become suspended"
+    for i in $(seq 1 "$1")
+    do
+        # Here we pass a hardcoded 0 to python script, and need to ensure
+        # DSP is the first audio pci device in 'lspci', this is true unless
+        # we have a third-party pci sound card installed.
+        [[ $(sof-dump-status.py --dsp_status 0) == "suspended" ]] && break
+        sleep 1
+        if [ "$i" -eq "$1" ]; then
+            die "DSP is not suspended after $1s, end test"
+        fi
+    done
+    dlogi "DSP suspended in ${i}s"
+}
+
+check_control_switch_state()
+{
+    # Check the state of the switch using amixer.
+    # The switch name is passed as the first argument, and the expected state (on/off)
+    # is passed as the second argument.
+    # Returns 0 if the state matches, 1 otherwise.
+    local control_name="$1"
+    local expected_control_state="$2"
+    local control_state
+
+    dlogi "Check if the state of control: $control_name is correct."
+    control_state=$(amixer -c "$SOFCARD" contents | \
+                        gawk -v name="$control_name" -f "${TESTLIB}/control_state.awk")
+    dlogi "$control_name switch is: $control_state"
+
+    if [ "$expected_control_state" = "$control_state" ]; then
+        return 0
+    else
+        dloge "Expected control state ($expected_control_state) but got ($control_state)."
+        return 1
+    fi
+}
+
+testing_one_pcm()
+{
+    dlogi "===== Testing: (Round: $i/$loop_cnt) (PCM: $pcm [$dev]<$type>) ====="
+    dlogi "DEVICE: $dev, TYPE: $type, PCM: $pcm, RATE: $rate, CHANNEL: $channel"
+
+    local dsp_status
+    local timeout=0
+    while [ "$timeout" -lt "$DSP_SUSPEND_TIMEOUT" ] ; do
+        dsp_status=$(sof-dump-status.py --dsp_status 0)
+        if [ "$dsp_status" = "suspended" ] ; then
+            break
+        fi
+        dlogi "Current DSP status is $dsp_status, waiting for it to be suspended..."
+        sleep 1
+        timeout=$((timeout + 1))
+    done
+
+    if [ "$dsp_status" != "suspended" ] ; then
+        die "Current DSP status ($dsp_status) is not suspended."
+    fi
+
+    dlogi "Unplug jack audio."
+    usbrelay_switch "$relay" 1
+
+    dlogi "Wait for ${relay_settle_time}s to ensure jack detection is off"
+    sleep "$relay_settle_time"
+
+    if ! check_control_switch_state "$headset_mic_jack_name" "off"; then
+        die "unplug $headset_mic_jack_name failed."
+    fi
+
+    if ! check_control_switch_state "$headphone_jack_name" "off"; then
+        die "unplug $headphone_jack_name failed."
+    fi
+
+    func_check_dsp_status "$dsp_settle_time"
+
+    dlogi "Plug jack audio."
+    usbrelay_switch "$relay" 0
+
+    dlogi "Wait for ${relay_settle_time}s to ensure jack detection is on"
+    sleep "$relay_settle_time"
+
+    if ! check_control_switch_state "$headset_mic_jack_name" "on"; then
+        die "Plug $headset_mic_jack_name failed."
+    fi
+
+    if ! check_control_switch_state "$headphone_jack_name" "on"; then
+        die "Plug $headphone_jack_name failed."
+    fi
+
+    func_check_dsp_status "$dsp_settle_time"
+}
+
+main()
+{
+    func_pipeline_export "$tplg" "type:playback"
+
+    setup_kernel_check_point
+
+    start_test
+
+    dlogi "Checking usbrelay availability..."
+    if ! command -v usbrelay > /dev/null; then
+        # If usbrelay package is not installed
+        skip_test "usbrelay command not found."
+    fi
+
+    if ! usbrelay_switch --debug > /dev/null; then
+        skip_test "Failed to get usbrelay status."
+    fi
+
+    dlogi "Reset USB Relay - plug jack audio."
+    usbrelay_switch "$relay" 0
+
+    for idx in $(seq 0 $((PIPELINE_COUNT - 1)))
+    do
+        initialize_audio_params "$idx"
+
+        if [[ "$pcm" != *"Jack"* ]] ; then
+            dlogi "PCM $pcm is not a Jack, skipping..."
+            continue
+        fi
+
+        for i in $(seq 1 "$loop_cnt")
+        do
+            testing_one_pcm
+            sof-kernel-log-check.sh "$KERNEL_CHECKPOINT"
+            setup_kernel_check_point
+        done
+    done
+}
+
+{
+    main "$@"; exit "$?"
+}