feat(zigbee): Add color modes support (XY,HSV,TEMP)

docs/en/zigbee/ep_color_dimmable_light.rst

@@ -5,13 +5,17 @@ ZigbeeColorDimmableLight
 About
 -----
 
-The ``ZigbeeColorDimmableLight`` class provides an endpoint for color dimmable lights in Zigbee networks. This endpoint implements the Zigbee Home Automation (HA) standard for color lighting devices, supporting RGB color control, dimming, and scene management.
+The ``ZigbeeColorDimmableLight`` class provides an endpoint for color dimmable lights in Zigbee networks. This endpoint implements the Zigbee Home Automation (HA) standard for color lighting devices, supporting multiple color modes (RGB/XY, HSV, and Color Temperature), dimming, and scene management.
 
 **Features:**
 * On/off control
-* Brightness level control (0-100%)
-* RGB color control
-* HSV color support
+* Brightness level control (0-255)
+* RGB/XY color control
+* HSV (Hue/Saturation) color support
+* Color temperature (mireds) support
+* Configurable color capabilities (enable/disable color modes)
+* Separate callbacks for RGB, HSV, and Temperature modes
+* Automatic color mode switching
 * Scene and group support
 * Automatic state restoration
 * Integration with common endpoint features (binding, OTA, etc.)
@@ -20,6 +24,8 @@ The ``ZigbeeColorDimmableLight`` class provides an endpoint for color dimmable l
 **Use Cases:**
 * Smart RGB light bulbs
 * Color-changing LED strips
+* Tunable white light bulbs
+* Full-spectrum color temperature lights
 * Mood lighting systems
 * Entertainment lighting
 * Architectural lighting
@@ -42,20 +48,96 @@ Creates a new Zigbee color dimmable light endpoint.
 
 * ``endpoint`` - Endpoint number (1-254)
 
+Color Capabilities
+******************
+
+setLightColorCapabilities
+^^^^^^^^^^^^^^^^^^^^^^^^^
+
+Configures which color modes are supported by the light. Must be called before starting Zigbee. By default, only XY (RGB) mode is enabled.
+
+.. code-block:: arduino
+
+    bool setLightColorCapabilities(uint16_t capabilities);
+
+* ``capabilities`` - Bit flags indicating supported color modes (can be combined with bitwise OR):
+
+  * ``ZIGBEE_COLOR_CAPABILITY_HUE_SATURATION`` - Hue/Saturation support
+  * ``ZIGBEE_COLOR_CAPABILITY_X_Y`` - XY (RGB) support
+  * ``ZIGBEE_COLOR_CAPABILITY_COLOR_TEMP`` - Color temperature support
+  * ``ZIGBEE_COLOR_CAPABILITY_ENHANCED_HUE`` - Enhanced hue support
+  * ``ZIGBEE_COLOR_CAPABILITY_COLOR_LOOP`` - Color loop support
+
+**Example:**
+
+.. code-block:: arduino
+
+    // Enable XY and Temperature modes
+    light.setLightColorCapabilities(
+        ZIGBEE_COLOR_CAPABILITY_X_Y | ZIGBEE_COLOR_CAPABILITY_COLOR_TEMP
+    );
+
+    // Enable all color modes
+    light.setLightColorCapabilities(
+        ZIGBEE_COLOR_CAPABILITY_X_Y | 
+        ZIGBEE_COLOR_CAPABILITY_HUE_SATURATION | 
+        ZIGBEE_COLOR_CAPABILITY_COLOR_TEMP
+    );
+
+This function will return ``true`` if successful, ``false`` otherwise.
+
 Callback Functions
 ******************
 
 onLightChange
 ^^^^^^^^^^^^^
 
-Sets the callback function for light state changes.
+.. deprecated:: This method is deprecated and will be removed in a future major version. Use ``onLightChangeRgb()`` instead.
+
+Sets the legacy callback function for light state changes (RGB mode).
 
 .. code-block:: arduino
 
     void onLightChange(void (*callback)(bool, uint8_t, uint8_t, uint8_t, uint8_t));
 
 * ``callback`` - Function pointer to the light change callback (state, red, green, blue, level)
 
+.. note::
+   This method is deprecated. Please use ``onLightChangeRgb()`` for RGB/XY mode callbacks.
+
+onLightChangeRgb
+^^^^^^^^^^^^^^^^
+
+Sets the callback function for RGB/XY color mode changes.
+
+.. code-block:: arduino
+
+    void onLightChangeRgb(void (*callback)(bool, uint8_t, uint8_t, uint8_t, uint8_t));
+
+* ``callback`` - Function pointer to the RGB light change callback (state, red, green, blue, level)
+
+onLightChangeHsv
+^^^^^^^^^^^^^^^^
+
+Sets the callback function for HSV (Hue/Saturation) color mode changes.
+
+.. code-block:: arduino
+
+    void onLightChangeHsv(void (*callback)(bool, uint8_t, uint8_t, uint8_t, uint8_t));
+
+* ``callback`` - Function pointer to the HSV light change callback (state, hue, saturation, value, level)
+
+onLightChangeTemp
+^^^^^^^^^^^^^^^^^
+
+Sets the callback function for color temperature mode changes.
+
+.. code-block:: arduino
+
+    void onLightChangeTemp(void (*callback)(bool, uint8_t, uint16_t));
+
+* ``callback`` - Function pointer to the temperature light change callback (state, level, temperature_mireds)
+
 Control Methods
 ***************
 
@@ -81,14 +163,14 @@ Sets the light brightness level.
 
     bool setLightLevel(uint8_t level);
 
-* ``level`` - Brightness level (0-100, where 0 is off, 100 is full brightness)
+* ``level`` - Brightness level (0-255, where 0 is off, 255 is full brightness)
 
 This function will return ``true`` if successful, ``false`` otherwise.
 
 setLightColor (RGB)
 ^^^^^^^^^^^^^^^^^^^
 
-Sets the light color using RGB values.
+Sets the light color using RGB values. Requires ``ZIGBEE_COLOR_CAPABILITY_X_Y`` capability to be enabled.
 
 .. code-block:: arduino
 
@@ -100,37 +182,85 @@ Sets the light color using RGB values.
 * ``blue`` - Blue component (0-255)
 * ``rgb_color`` - RGB color structure
 
-This function will return ``true`` if successful, ``false`` otherwise.
+This function will return ``true`` if successful, ``false`` otherwise. Returns ``false`` if XY capability is not enabled.
 
 setLightColor (HSV)
 ^^^^^^^^^^^^^^^^^^^
 
-Sets the light color using HSV values.
+Sets the light color using HSV values. Requires ``ZIGBEE_COLOR_CAPABILITY_HUE_SATURATION`` capability to be enabled.
 
 .. code-block:: arduino
 
     bool setLightColor(espHsvColor_t hsv_color);
 
 * ``hsv_color`` - HSV color structure
 
+This function will return ``true`` if successful, ``false`` otherwise. Returns ``false`` if HSV capability is not enabled.
+
+setLightColorTemperature
+^^^^^^^^^^^^^^^^^^^^^^^^
+
+Sets the light color temperature in mireds. Requires ``ZIGBEE_COLOR_CAPABILITY_COLOR_TEMP`` capability to be enabled.
+
+.. code-block:: arduino
+
+    bool setLightColorTemperature(uint16_t color_temperature);
+
+* ``color_temperature`` - Color temperature in mireds (inverse of Kelvin: mireds = 1000000 / Kelvin)
+
+**Example:**
+
+.. code-block:: arduino
+
+    // Set to 4000K (cool white)
+    uint16_t mireds = 1000000 / 4000;  // = 250 mireds
+    light.setLightColorTemperature(mireds);
+
+    // Set to 2700K (warm white)
+    mireds = 1000000 / 2700;  // = 370 mireds
+    light.setLightColorTemperature(mireds);
+
+This function will return ``true`` if successful, ``false`` otherwise. Returns ``false`` if color temperature capability is not enabled.
+
+setLightColorTemperatureRange
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+Sets the minimum and maximum color temperature range supported by the hardware.
+
+.. code-block:: arduino
+
+    bool setLightColorTemperatureRange(uint16_t min_temp, uint16_t max_temp);
+
+* ``min_temp`` - Minimum color temperature in mireds
+* ``max_temp`` - Maximum color temperature in mireds
+
+**Example:**
+
+.. code-block:: arduino
+
+    // Set range for 2000K (warm) to 6500K (cool)
+    uint16_t min_mireds = 1000000 / 6500;  // = 154 mireds
+    uint16_t max_mireds = 1000000 / 2000;  // = 500 mireds
+    light.setLightColorTemperatureRange(min_mireds, max_mireds);
+
 This function will return ``true`` if successful, ``false`` otherwise.
 
 setLight
 ^^^^^^^^
 
-Sets all light parameters at once.
+Sets all light parameters at once (RGB mode). Requires ``ZIGBEE_COLOR_CAPABILITY_X_Y`` capability to be enabled.
 
 .. code-block:: arduino
 
     bool setLight(bool state, uint8_t level, uint8_t red, uint8_t green, uint8_t blue);
 
 * ``state`` - Light state (true/false)
-* ``level`` - Brightness level (0-100)
+* ``level`` - Brightness level (0-255)
 * ``red`` - Red component (0-255)
 * ``green`` - Green component (0-255)
 * ``blue`` - Blue component (0-255)
 
-This function will return ``true`` if successful, ``false`` otherwise.
+This function will return ``true`` if successful, ``false`` otherwise. Returns ``false`` if XY capability is not enabled.
 
 State Retrieval Methods
 ***********************
@@ -155,7 +285,7 @@ Gets the current brightness level.
 
     uint8_t getLightLevel();
 
-This function will return current brightness level (0-100).
+This function will return current brightness level (0-255).
 
 getLightColor
 ^^^^^^^^^^^^^
@@ -201,18 +331,117 @@ Gets the current blue component.
 
 This function will return current blue component (0-255).
 
+getLightColorTemperature
+^^^^^^^^^^^^^^^^^^^^^^^^
+
+Gets the current color temperature.
+
+.. code-block:: arduino
+
+    uint16_t getLightColorTemperature();
+
+This function will return current color temperature in mireds.
+
+getLightColorMode
+^^^^^^^^^^^^^^^^^
+
+Gets the current active color mode.
+
+.. code-block:: arduino
+
+    uint8_t getLightColorMode();
+
+This function will return current color mode:
+* ``ZIGBEE_COLOR_MODE_CURRENT_X_Y`` (0x01) - XY/RGB mode
+* ``ZIGBEE_COLOR_MODE_HUE_SATURATION`` (0x00) - HSV mode
+* ``ZIGBEE_COLOR_MODE_TEMPERATURE`` (0x02) - Temperature mode
+
+getLightColorHue
+^^^^^^^^^^^^^^^^
+
+Gets the current hue value (HSV mode).
+
+.. code-block:: arduino
+
+    uint8_t getLightColorHue();
+
+This function will return current hue value (0-254).
+
+getLightColorSaturation
+^^^^^^^^^^^^^^^^^^^^^^^
+
+Gets the current saturation value (HSV mode).
+
+.. code-block:: arduino
+
+    uint8_t getLightColorSaturation();
+
+This function will return current saturation value (0-254).
+
+getLightColorCapabilities
+^^^^^^^^^^^^^^^^^^^^^^^^^
+
+Gets the currently configured color capabilities.
+
+.. code-block:: arduino
+
+    uint16_t getLightColorCapabilities();
+
+This function will return the current color capabilities bit flags.
+
 Utility Methods
 ***************
 
 restoreLight
 ^^^^^^^^^^^^
 
-Restores the light to its last known state.
+Restores the light to its last known state. Uses the appropriate callback based on the current color mode.
 
 .. code-block:: arduino
 
     void restoreLight();
 
+Color Modes and Automatic Behavior
+**********************************
+
+The ``ZigbeeColorDimmableLight`` class supports three color modes:
+
+* **XY/RGB Mode** (``ZIGBEE_COLOR_MODE_CURRENT_X_Y``) - Uses X/Y coordinates for color representation, internally converted to RGB
+* **HSV Mode** (``ZIGBEE_COLOR_MODE_HUE_SATURATION``) - Uses Hue and Saturation values directly, without RGB conversion
+* **Temperature Mode** (``ZIGBEE_COLOR_MODE_TEMPERATURE``) - Uses color temperature in mireds
+
+**Automatic Mode Switching:**
+
+The color mode is automatically updated based on which attributes are set:
+
+* Setting RGB colors via ``setLight()`` or ``setLightColor()`` (RGB) → switches to XY mode
+* Setting HSV colors via ``setLightColor()`` (HSV) → switches to HSV mode
+* Setting temperature via ``setLightColorTemperature()`` → switches to Temperature mode
+* Receiving Zigbee commands for XY/HSV/TEMP attributes → automatically switches to the corresponding mode
+
+**Capability Validation:**
+
+All set methods validate that the required capability is enabled before allowing the operation:
+
+* RGB/XY methods require ``ZIGBEE_COLOR_CAPABILITY_X_Y``
+* HSV methods require ``ZIGBEE_COLOR_CAPABILITY_HUE_SATURATION``
+* Temperature methods require ``ZIGBEE_COLOR_CAPABILITY_COLOR_TEMP``
+
+If a capability is not enabled, the method will return ``false`` and log an error.
+
+**Callback Selection:**
+
+The appropriate callback is automatically called based on the current color mode:
+
+* RGB/XY mode → ``onLightChangeRgb()`` callback
+* HSV mode → ``onLightChangeHsv()`` callback
+* Temperature mode → ``onLightChangeTemp()`` callback
+
+When level or state changes occur, the callback for the current color mode is used automatically.
+
+.. note::
+   The legacy ``onLightChange()`` callback is deprecated and will be removed in a future major version. Always use the mode-specific callbacks (``onLightChangeRgb()``, ``onLightChangeHsv()``, or ``onLightChangeTemp()``).
+
 Example
 -------