Blocks

Here's an up-to-date list of all the blocks. You can make YOUR FRAME just by importing in a .dxf file all the blocks that you want (you'll find them in the /blocks subfolder). WARNING: take care to import the REQUIRED blocks as many times as suggested inside the brackets!

Frame

• front_frame (x1) REQUIRED
• PSU_lateral_frame (x1) REQUIRED
• ArduinoMega_lateral_frame / ArduinoMega_lateral_frame_without_hole (x1) REQUIRED
• base_frame_reinforcement (x4 or x2)
• spool_holder_bracket (x2) (alternative)

---

Print bed (4_points_only)

• print_bed (x1) REQUIRED

Print bed (3_or_4_points)

• print_bed (x1) REQUIRED
• adapter (x1)

---

Y axis

• Y_axis_base_front (x1) REQUIRED
• Y_axis_base_rear (x1) REQUIRED
• Y_axis_idler_3mm_hole / Y_axis_idler_5mm_hole (x2) (alternative)
• Y_axis_rod_end (x4) (alternative 1) (alternative 2)
• NEMA17_fixing_plate_Y_axis (x2) REQUIRED

---

Z axis

• Z_axis_top (x2) REQUIRED
• Z_axis_top_rod_end (x2) (alternative)
• NEMA17_fixing_plate_Z_axis (x2) REQUIRED
• NEMA17_fixing_plate_support (x4) REQUIRED